OS-5002
Actuator Type Opto Sensor
  • Photo transistor output
  • Selectable supply voltage with RF and RL resistor value (5V, 12V, 24VDC)
  • Top side actuator
  • Snap action mount
  • Low actuating force (0.4g)
  • Selectable mounting plate thickness (1.6mm, 2.0mm)
MAXIMUM RATINGS (Ta=25°C)
Item Symbol Value
Input Forward Current IF 50mA
Reverse Voltage VR 5V
Output C-E Voltage VCEO 30V
E-C Voltage VECO 5V
Collector Current IC 50mA
Collector Power Dissipation PC 75mW
ELECTRICAL CHARACTERISTICS (Ta=25°C)
Item Symbol Conditions Min Typ Max Unit
Input Forward Voltage VF IF=10mA 1.0 1.15 1.3 V
Reverse Current IR VR=5V - - 10 µA
Output Dark Current ID VCE=24V IF=0 - 5 100 nA
Collector Current *1 IC IF=20mA VCE=5V 2.0 5.0 - mA
Collector Leak Current *2 ICP IF=20mA VCE=5V - - 50 µA
C-E
Saturation Voltage
VCE
(Sat)
IF=20mA
IC=1mA
- 0.15 0.4 V
*1 with actuator operated *2 with actuator released
MECHANICAL CHARACTERISTICS
Item Limits
Operating Force 0.4g Max
Resistance to Vibration 10~55Hz, 1.5mm
Resistance to Shock 30G
Mechanical Life 106
Operating Temp. -20° ~ +75°C
Storage Temp. -25° ~ +90°C
Mounting Plate Thickness 1.6 ± 0.05mm, 2 ± 0.05mm
RECOMMENDED RF and RL VALUE
VCC 5V 12V 24V
RF 200~470 ohms 1/4W 680~1.2K ohms 1/4W 1.2K~2.4K ohms 1/2W
RL 20K~47K ohms 20K~47K ohms 20K~47K ohms
Schematic/Typical Circuit
 
PCB Locating Hole
Contents - Opto Sensors
 
Selection Guide / Application Notes
  Interrupter Type Opto Sensor Selection Page 1
  Interrupter Type Opto Sensor Selection Page 2
Interrupter Type Opto Sensor Selection Page 3 and Reflective Type Opto Sensor Selection
  Actuator Type Opto Sensor Selection
Standard Terms: Check/Money Order
Net 30
Credit Card
Minimum Order: $100.00
Wholesale/OEM
Master Card Visa
American Express Discover
 
Distributed by
CeeJay16475 Canyon Hills Road #3Chino Hills, California 91709
Tel: (714) 572-2169Fax: (714) 572-2169E-mail: sales@ceejay.com
© Copyright 1997 - 2004, CeeJay
All rights reserved.