OS-5901
Actuator Type Opto Sensor
  • Photo IC output, Internal Schmitt trigger circuit
  • Directly compatible with TTL, LSTTL, CMOS
  • Low actuating force (0.4g)
  • Snap action mount
  • Selectable mounting plate thickness (0.8, 1.0, 1.2mm)
MAXIMUM RATINGS (Ta=25°C)
Item Symbol Value
Supply Voltage VCC 6V
Output Voltage VOUT VCC + 0.5V
Output Current IOUT 50mA
Output Power Dissipation POUT 250mW
ELECTRICAL CHARACTERISTICS (Ta=25°C)
Opto Path Item Symbol Value Conditions
Open
with actuator operated		 Current Consumption ICCH 20mA Max
On Voltage VOH (VCC X 0.9)V Min R=47K ohms
Blocked
with actuator released		 Current Consumption ICCL 20mA Max
Off Voltage VOL 0.4V Max IOL=16mA
MECHANICAL CHARACTERISTICS
Item Limits
Operating Force 0.4g Max
Resistance to Vibration 10~55Hz, 1.5mm
Resistance to Shock 30G
Mechanical Life 106
Operating Temp. -20° ~ +75°C
Storage Temp. -25° ~ +90°C
Mounting Plate Thickness 0.8mm, 1mm, 1.2mm (± 0.05mm)
Schematic

* Reverse output models available
* Open collector output models available
PCB Locating Hole
Contents - Opto Sensors
 
Selection Guide / Application Notes
  Interrupter Type Opto Sensor Selection Page 1
  Interrupter Type Opto Sensor Selection Page 2
Interrupter Type Opto Sensor Selection Page 3 and Reflective Type Opto Sensor Selection
  Actuator Type Opto Sensor Selection
Standard Terms: Check/Money Order
Net 30
Credit Card
Minimum Order: $100.00
Wholesale/OEM
Master Card Visa
American Express Discover
 
Distributed by
CeeJay16475 Canyon Hills Road #3Chino Hills, California 91709
Tel: (714) 572-2169Fax: (714) 572-2169E-mail: sales@ceejay.com
© Copyright 1997 - 2004, CeeJay
All rights reserved.