|
|
| Dry Reed Switches |
 |
|
| Part # |
HYR1002 |
HYR1003 |
HYR1531 |
HYR1532 |
Dimensions
Unit : mm(inch) |
 |
 |
 |
 |
| Contact Form |
1A |
1A |
1A |
1A |
| Contact Position *1 |
O |
C |
O |
C |
| Contact Material |
Rhodium |
Rhodium |
Ruthenium *4 |
Ruthenium *4 |
Max.
Contact
Rating |
0.3W |
3W |
20W |
10W |
| Max. Switching Voltage |
28VDC |
28VDC |
200VDC |
200VDC |
| Max. Switching current |
0.01A |
0.11A |
0.5A |
0.5A |
| Max. Initial Contact Resistance |
200m ohms |
200m ohms |
150m ohms |
150m ohms |
| Pull in Value (AT) |
15-50 |
10-35 |
15-50 |
15-50 |
| Min. Drop out Value (AT) |
8 |
4 |
7 |
5 |
| Min. Breakdown Voltage *2 |
200VDC |
200VDC |
250VDC |
250VDC |
Max.
Contact Capacitance |
0.2pF |
0.2pF |
0.4pF |
0.4pF |
| Min. Insulation Resistance |
1010 ohms |
1010 ohms |
109 ohms |
1010 ohms |
| Typ. Resonant Frequency |
3.5kHz |
5kHz |
2.8kHz |
4.8kHz |
| Electrical Life (Resistive loads) |
107 (5VDC, 10mA)
106 (24VDC, 10mA) |
7 X 106 (5VDC, 10mA)
106 (24VDC, 100mA) |
108 (10mVDC, 10µA)
105 (100VDC, 100mA) |
108 (10mVDC, 10µA)
105 (100VDC, 100mA) |
| Test Coil |
TC-0501 |
TC-0502 |
| Features |
Ultra miniature |
Ultra miniature |
High power |
General application |
|
| |
|
Notes
- C: Center gap O: Off center gap
- Breakdown
voltage specifications are based on Pull-In sensitivity of 25 AT or higher.
Contact ALEPH for information for switches with less than 25 AT sensitivity. HYR4000,
HYR5000, HYR9000 Series are specified on basis of the lowest AT Pull-In
sensitivity range.
- Ruthenium Oxide over Rhodium.
- Ruthenium Oxide
over Palladium.
|
|
|
|
|
|
|
|
|
|
| Standard Terms: |
Check/Money Order
Net 30
Credit Card |
| Minimum Order: |
$100.00 |
|
| Wholesale/OEM |
|
|
|
|
| |
Distributed by
CeeJay 16475
Canyon Hills Road #3Chino
Hills, California 91709
Tel: (714) 572-2169Fax:
(714) 572-2169E-mail:
sales@ceejay.com |
|
© Copyright 1997 - 2004, CeeJay
All rights reserved.
|
| |
 |
